S Series Spiral Worm Gear Reducer Motor - Daily Inspection Checklist
| Check | What to Look For |
|---|
| Oil level | Check weekly – top up if below mark |
| Unusual noise | Listen for grinding or whining – early warning of wear |
| Oil leaks | Inspect seals – address immediately |
| Temperature | Touch test – should not exceed 90°C |
| Vibration | Feel for abnormal shaking – check mounting bolts |
⚠️ Critical: Mounting position (M1-M6) determines oil capacity. If your gearbox is installed in a different position than ordered, oil level will be wrong.
